Global Market Access: Nemko Group AS Testing Services

Malaysia Type Approval & SIRIM Certification

Written by Vanessa Wen | November 22, 2026

Malaysia EMC requirements have changed. Is your product ready?

Planning to sell wireless or telecommunications equipment in Malaysia? Updated EMC requirements could affect testing, certification costs and your product launch timeline.

SIRIM QAS International confirmed full implementation of EMC emissions and immunity requirements under MCMC MTSFB TC T022:2026 – Communications Equipment: Baseline Requirements, effective November 5, 2026. Its announcement SQASI/CMCS/1/26/011, dated October 13, 2026, also introduces additional evaluation fees for applications subject to EMC immunity assessment.

Key takeaways

  • November 5, 2026: This technical code will serve as the baseline requirement for all communication equipment including (but not limited to) user equipment, network facilities, and radiocommunications equipment

  • New added immunity requirement from November 5. 2026, for Directly connected equipment (Equipment that establishes a direct connection to the Network Service Provider (NSP) without requiring an intermediary device)

  • If the equipment has hybrid functionality and can operate as both directly and indirectly connected equipment, it shall comply with the requirements for directly connected equipment

  • Existing reports and certifications should be reviewed on a product-by-product basis, if there is no immunity result in report, new samples may be required for additional testing

Which products may be affected?

This technical code is applicable to all communications equipment in Malaysia, covers baseline requirements on Radio Frequency (RF), Internet Protocol version 6 (IPv6), Electrical Safety, Electromagnetic Compatibility (EMC) and Specific Absorption Rate (SAR), and Power Density (PD). 

This Technical Code shall be read together with other applicable Technical Codes on communications equipment. For example, MCMC MTSFB TC T007:2026 (3rd Revision) for Short Range Device

Malaysia Type Approval: how the process works

  1. Classify the product: Identify radio functions, frequencies, interfaces and applicable MCMC technical codes.

  2. Review reports: Check RF, EMC, safety and other evidence against Malaysian acceptance requirements.

  3. Prepare documents: Compile specifications, reports, photographs, manuals, label details and applicant information.

  4. Apply through SIRIM: Coordinate the relevant certification route and submit through SIRIM e-ComM.

  5. Certification and marking: Complete applicable approval and SIRIM Self-Labelling Program obligations.

  6. Plan import clearance: Determine whether a separate Certificate of Approval or import permit is needed.

Other considerations for manufacturers

  • FCC/CE reports may support an application but do not automatically replace Malaysian approval.

  • Additional testing depends on product classification, report scope and SIRIM acceptance.

  • Confirm local applicant or certificate-holder arrangements early.

  • Allow for applicable labeling, import documentation, sample and evaluation costs.

  • For existing certificates, confirm the transition and any PBC procedure against the complete SIRIM circular.

Need help with Malaysia Type Approval?

Nemko can help manufacturers evaluate MCMC/SIRIM requirements, review existing test evidence, coordinate EMC/RF and safety testing, and support international certification planning.

CONTACT NEMKO — MALAYSIA TYPE APPROVAL  

Meet Nemko: Compliance Without Complexity

Connect with Nemko experts to discuss EMC, wireless, product safety, cybersecurity and Global Market Access developments.

Irvine, California — December 8, 2026 | 3:00–7:00 PM

Event details and registration 

Austin / Round Rock, Texas — December 9, 2026 | 12:00–4:00 PM

Event details and registration