Q&A With Our Reliability Testing Specialists
Environmental and Reliability Testing can raise a lot of questions. Which tests are relevant? How do you know what conditions to test the product for? And what can the test results actually tell you about your product?
To answer these questions, we spoke with specialists Jarle and André from Nemko Scandinavia’s Reliability Testing team. Drawing on their experience from the laboratory, they share their perspectives on some of the questions manufacturers frequently have about Reliability Testing.
What is Reliability Testing, and what can it tell you about a product?
Reliability Testing helps us understand how a product behaves when it is exposed to the stresses it may encounter during transportation, storage, and use. These stresses can include vibration, mechanical shock, rapid temperature changes, humidity, water, and dust.
When we test, we look for both functional problems and physical damage. The results can help manufacturers identify weaknesses, compare design alternatives, and document performance against agreed requirements.
Test conditions and acceptance criteria give those results their meaning. Ultimately, the value lies in understanding where a product may need improvement and having evidence of what it can withstand.
How do you determine which tests are relevant for a product?
The staring point is the product’s intended use and the conditions it may encounter during transport, storage, and operation, together with the requirements that need to be demonstrated. These requirements may come from product specifications, standards, regulations, or customer requirements.
Some of our customers already have a defined test programme, while others need support with planning. We can advise on test methods, operating modes, acceptance criteria, and practical arrangements.
Where testing is required for approval, the scope and documentation requirements should be confirmed with relevant certification body, classification society, or customer. We perform the agreed tests and document the results, while the final approval remains with the responsible body.
What are some common misconceptions about Reliability Testing?
One common misconception it that testing is simply a formality needed to obtain a report or approval. That can overshadow its practical purpose, which is more focused on understanding whether the product performs as intended under the relevant conditions.
Another challenge is defining how the product should operate during testing. Simply switching it on may not exercise the functions that need to be evaluated. Clear pass and fail criteria should therefore be agreed on before testing begins.
We also see cases where customers expect a product to withstand environmental conditions beyond what it was originally designed for. Testing helps establish whether those expectations are supported by the product’s actual design and performance.
Is a failed test always a bad result?
Short answer: no. Finding a weakness in the laboratory gives the manufacturer an opportunity to understand and improve the product before the same weakness appears in the field.
For example, vibration testing has led to securing capacitors to circuit boards, improved screw retention, stronger brackets, and vibration isolation. Temperature testing has resulted in improved cooling and electronics suitable for wider temperature ranges. Damp heat findings have prompted protective circuit-board coatings, while salt mist and IP-testing have led to changed in materials, seals, filters, and protective barriers.
The important part is to understand the failure mechanism before changing the design, and then verify that the modification actually solves the problem.
What should customers prepare before approaching a Reliability Testing laboratory?
Start with the product’s intended use, expected environment, and any applicable standards or customer specifications. It also helps to explain what you want to learn or document and share known weaknesses or previous test results.
Practical information matters too. Product drawings, dimensions, weight, and mounting details help us plan the test setup. Operating modes, functions to monitor, and clear acceptance criteria should be agreed on before testing begins.
Customers should also consider samples, cables, power supplies, software, auxiliary equipment, and timing. If all the requirements are not yet clear, contact us early. We can work through the test requirements and practical preparations together.
What is one thing you wish more customers knew about Reliability testing?
Good preparation makes a real difference to what you get out of testing.
Involve the people who understand both the product design and its requirements, and agree on what the results need to demonstrate. Make sure the product ca be operated and monitored as planned, with technical support available is something unexpected happens.
You don’t need to have every detail resolved before contacting the laboratory. An early discussion can help clarify that is needed. It is also important to allow time to investigate findings, make changes, and repeat relevant tests. That is how Reliability Testing can contribute to a better product.
Reliability testing at Nemko Scandinavia
Our laboratories close to Oslo support manufacturers with Environmental and Reliability Testing, alongside EMC, Radio, and Product Safety services.
Whether you are planning a test programme, preparing for qualification, or trying to understand how a product responds under demanding conditions, our team can help you define the testing requirements and practical setup.






