Nemko Austin, TX

Austin TX Headquarters: 1601 N. A.W. Grimes Blvd. Suite B Round Rock, TX 78665

For over 35 years, Nemko Austin has specialized in providing testing, engineering, and certification services in EMC, EMI, Environmental, Reliability, Product Safety, and Explosive Atmospheres. We supported industries ranging from Information Technology, Test and Measurement, Medical, Military, Aviation and Aerospace, Marine, Oil, and Gas.

Sales Team Austin, TX

Jeff Lenk

Site Manager

Contact info and biography

jeff.lenk@nemko.com

Jeff Lenk has been bringing products to market through engineering, consulting and testing services. Leading the worldwide transformation of product development. His Specialties include: EMC, Product Safety and Reliability Testing and Consulting.

Eric Lenk

Associate Sales Manager

Contact info and biography

eric.lenk@nemko.com

Eric Lenk

Brian Smith

Senior Account Executive

View Biography

brian.smith@nemko.com

An experienced TAM Outside Sales and Account Management Professional who enjoys working in a challenging environment that promotes teamwork, collaboration and professional development. A dedicated, self-motivated individual committed to professionalism with extensive experience in Electronics of multiple product lines.

Nemko's services

EMC/EMI Testing
Electromagnetic compatibility (EMC) and radio frequency (RF) testing is used to analyze whether or not a device can operate as it should when in close contact with other devices.

Wireless
The development of innovative, wireless technologies has brought new products online that never before had wireless connectivity, revolutionizing once-manual and disconnected business processes across a range of industries.

Environmental & Dynamic Testing
Determine if your product can withstand exposure to its intended environment through a wide range of environmental and reliability tests performed by experts at the accredited Nemko laboratory for mechanical stress and climatic conditions.

Reliability & Materials Testing
The Nemko reliability laboratory works closely with our EMC (electromagnetic compatibility) and safety laboratories, providing you with one-stop-shopping for full range testing of your product.

Electrical Product Safety
Testing, inspecting, and certifying products in order to achieve compliance with product safety standards is a crucial part in ensuring consumer safety while using these associated products.

Machinery Product Safety
Nemko’s industrial machinery safety testing assessment works to minimize potential machine defects and maximize the product’s level of compliance according to Machinery Directive 2006/42/EC for the CE Marking Machinery Directive.

Hazardous Locations & Explosive Atmospheres testing
Our team of experienced ATEX and IECEx compliance engineers deliver a flexible and commercial approach to approvals, offering you a fast and cost-effective route into international markets, starting in the design phase of your new products.

Field Labeling
Nemko offers Field Evaluation and Special Inspection Services in the US and Canada as a fast and economical alternative to traditional product safety certification.

In-situ EMC Testing
When your systems are too cumbersome to make it into a laboratory or your equipment requires an extensive power supply, Nemko can bring our testing equipment to you.

EMC Standards

47 CFR Part 15 – FCC Requirements for Intentional (wireless) and Unintentional Radiators (digital devices)
47 CFR Part 18 – FCC Requirements for Industrial Scientific and Medical Products.
ICES 003 – Industry Canada’s requirements for unintentional radiators (digital devices)
Mil-Std-461 – US Military and Procurement Agencies requirements of Electrical Products
RTCA DO-160 – The requirements for electrical products for use on aircrafts
EN 55022 – Emissions measurements for Information Technology Equipment
EN 55011 – Emissions measurements for Industrial Scientific and Industrial Equipment
EN 61326-1 – Emissions and Immunity Testing requirements for Test Measurement and Control systems and products
EN 55024 – Immunity Test requirements for Information Technology Equipment
EN 60601-1-2 – EMC requirements for Medical Equipment
EN 60945 – EMC requirements for Marine Equipment
DNVGL-CG-0339 – Environmental test specification for electrical, electronic and programmable equipment and systems
EN 15964 – Breath Alcohol Test Devices other than Single Use Devices
EN 55014-1 – Electromagnetic compatibility – Requirements for household appliances, electric tools and similar
EN 55032 – Electromagnetic compatibility of multimedia equipment – Emission requirements
EN 55103-1 – Electromagnetic compatibility – Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use – Part 1: Emissions
EN 55103-2 – Electromagnetic compatibility – Product family standard for audio, video, audio-visual and entertainment lighting control apparatus for professional use – Part 2: Immunity
EN 61000-6-1 – Electromagnetic compatibility (EMC) – Part 6-1: Generic standards – Immunity for residential, commercial, and light-industrial environments
EN 61000-6-2 – Electromagnetic compatibility (EMC) – Part 6-2: Generic standards – Immunity for industrial environments
EN 61000-6-3 – Electromagnetic compatibility (EMC) – Part 6-3: Generic standards – Emission standard for residential, commercial and light-industrial environments
EN 61000-6-4 – Electromagnetic compatibility (EMC) – Part 6-4: Generic standards – Emission standard for industrial environments

Hazardous Locations

Accreditations cover:

IEC 60079-0
IEC 60079-2
IEC 60079-5
IEC 60079-6
IEC 60079-7
IEC 60079-13
IEC 60079-15
IEC60079-18
IEC60079-28
IEC 60079-31
IEC TS 60079-46
IEC ISO 80079-36
IEC ISO 80079-37

NRTL Products and Categories

Standard
United States	Canada	Description
UL 62368	CSA 22.2 62368	A/V, Information and Communication Equipment
UL 61010	CSA 22.2 61010	Laboratory, Medical, and Control Equipment
UL 60601	CSA 22.2 60601	Medical Equipment
*CDRH 21 CFR	*CSA E60825	Laser Products
UL XXXXX	CSA XXXXX	Although we specialize in the above standards, there are many more we can evaluate just ask.

Military/Aerospace

The DO-160 sections we are accredited to are as follows:

Section 15: Magnetic Effect
Section 16: Power Inputs
Section 17: Voltage Spikes
Section 18: Audio Frequency Conducted Susceptibility
Section 19: Induced Signal Susceptibility
Section 20: radio Frequency Susceptibility – Conducted and Radiated
Section 21: Emissions of Radio Frequency Energy – Conducted and Radiated
Section 22: Lightning-Induced Transient Susceptibility
Section 25: Electrostatic Discharge (ESD)

Medical

The Center for Devices and Radiological Health (CDRH), a division of the Food and Drug Administration (FDA), regulates laser products imported to or manufactured in the United States.  When submitting a product containing a laser through an NRTL for use in the United States or Canada, it may be necessary to evaluate your product for laser safety in accordance with CDRH 21, CFR, or CSA E60825, respectively.  We can evaluate your product to CDRH 21, CFR, or CSA E60825 and assist you with the required documentation for compliance with these standards.

UL 60601	Description Medical Equipment
IEC 14971	Application of Risk Management to Medical Devices
*CDRH 21, CFR	Laser Products
UL XXXX	Although we specialize in the above standards, there are many more we can evaluate products to, just ask.

Wireless

We specialize in the low power technologies such as:

IEEE 801.11 a, b, g, n
Bluetooth
Zigbee
Digital Spread Spectrum
Frequency-Shift Key (FSK) and Phase Shift Key (PSK)
Ultra Wideband (UWB)
Others – falling under 47 CFR Part 15, Sections 15.231, 15.247 and 15.249

Reliability

Altitude Testing
Nemko is capable of simulating up to an equivalent of 70,000 feet while also maintaining temperature. Chambers include sizes up to 24” X 24” X 48”. These altitude chambers are also capable of rapid decompression, as a pump can simulate a loss of cabin pressurization.

Salt Fog Testing
Nemko can create a salt fog environment to simulate the effects of a marine environment. Determining how a product will fair in a corrosive atmosphere is important for many products. PTI’s primary method of simulating this is in a salt fog chamber, which is 24″ X 24″ X 48″. Typically a product is immersed in the environment for 24-72 hours.